Amazon basics usb to ethernet adapter driver mac os x#
Revision 3.10 June 23rd, 2014 USB 2.0 to 10/100 Ethernet LAN Network Adapter Mac OS X Driver Installation Guide Amazon ASIN: B00M77HLII. With the introduction of USB-C and Thunderbolt 3 to the MacBook lineup in 2016, adding ethernet and other ports back to your MacBook is easier than ever. Reconnect the cable to the other part, restart the server on the PI and try again.Īmazon Basic Ethernet Adapter Driver Mac It's been some time since Apple built in an ethernet port to its MacBook Pro lineup.
Make sure you use the right IP address for the interface you are using (eth0 for Ethernet, eth1 for USB) On Windows, open a console window and cd to the directory where you unzipped iperf3 and type: eth0 is the Ethernet port, eth1 is the USB port - these have different IP addresses You will see two Ethernet addresses: eth0 and eth1. On the Windows client side you need to know the server's IP address. Iperf3 uses a client server mode and I used the PI as the server. This is a zip file that you open and then just run exe file To install iperf3 on the Pi type: sudo apt-get install iperf3įor windows search for iperf3 (I can't include the url). In fact, if I tried to do the test by having both connected to my broadband router I got a connection denied because of the firewall on the router. I connected them directly using a Cat 5e Ethernet cable. I tested the speed between the Pi and my windows laptop using iperf3. If you're interested in how I checked the speed here are some details. I then checked the network speed at got 215 Mbps through the USB compared to 95 Mbps through the Ethernet port. I plugged it into the Pi and it worked straight away with no need for configuration.
There were a few choices but I plumped for this one based on other reviews and I'm glad I did. I had read that the Ethernet port on the Raspberry Pi Model 3B was slower that the Model 2 and that a USB adaptor would be quicker.